品名:三乙烯二胺NAME：HJCP-TEDA(TEDA) 含量>=99.85 用途：用于各種聚氨酯泡沫塑料 分子式FORMULA: C6H12N2 APPLICATION：Used for all kinds of Polyurethanefoam.
品名:A-33 HJCP-A33D(TEDA-33% DPG) HJCP-A33E(TEDA-33% MEG) HJCP-A33B(TEDA-33% BDO) 用途: 用于各種類型的聚氨酯泡沫塑料及微孔彈性體 APPLICATION: Used for PU foam and microcellular elastomer.
品名：延遲催化劑(1027) NAME: HJCP-A37E(Equivalent to1027) 用途：用于乙二醇系統鞋底和自結皮微孔泡沫系統的催化劑 APPLICATION：Delayed Catalyst, used for MEG extended shoe sole andintegral skin.
品名：延遲催化劑(1028) NAME: HJCP-A37B (Equivalent to1028) 用途：用于1,4丁二醇系統鞋底和自結皮微孔泡沫系統的催化劑 APPLICATION：Delayed Catalyst, used for BDO extended shoesole and integral skin.
品名：延遲催化劑(8154) NAME: HJCP-A34 (Equivalent to8154) 用途：用于汽車等座墊的生產加工，是一種具有延遲催化用的水溶性叔胺復合類催化劑。 APPLICATION: Delayed amine watersoluble0020catalyst, used for car seat.
品名：胺類催化劑(C-225) NAME: HJCP-AC25 (Equivalent toC225) 用途：快速脫模高回彈冷模塑泡沫的平衡性催化劑, 它能有效的平衡催化反應，優化流動性，并且能縮短脫模時間，是汽車座椅生產線上的最佳助劑。 APPLICATION：It is balance catalysts used for HR cold molded foamespecially for car seat.
品名：胺類催化劑(CS-90) NAME: HJCP-AP90(Equivalent to CS-90) 用途：用于軟質塊狀泡棉 APPLICATION：Used for flexible slabstock foam.
品名：胺類催化劑(SMP) NAME: HJCP-SCLD (Equivalent toSMP) 用途：用于中低密度泡棉的生產 APPLICATION：Used for foam of medium and low density
品名：胺類催化劑(A-300) NAME: HJCP-AC300(Equivalent to A-300) 用途：適用于高回彈冷模塑泡沫的延遲凝膠催化劑, 它能有效的提高泡沫的開孔性，同時它不影響泡沫的凝膠速度。 APPLICATION: Delayed gel catalystapplicable to HR cold molded foam.
10品名：胺類催化劑(A-400) NAME: HJCP-AC400(Equivalent toA-400) 用途：適用于高回彈冷模塑泡沫的延遲吹發性催化劑, 特別適用于汽車座椅等產品。 APPLICATION: Delayed blowingcatalysts applicable to HR cold molded foam, especially for car seat.
11品名：辛酸亞錫(T9) NAME: HJCP-MCT9(Stannous Octoate) CAS NO：301-10-0 分子式FORMULA:C16H30O4Sn 用途：用于軟質塊狀聚醚型聚氨酯泡沫塑料. APPLICATION: Used for polyethertype flexible slabstock foam.
12品名：二月桂酸二丁基錫(T12) NAME: HJCP-MCT12(DBTDL) CAS NO：77-58-7 分子式FORMULA:C32H64O4Sn 用途：用于彈性體，膠黏劑，密封膠，涂料，硬泡，模塑泡沫，RIM等，它可與胺催化劑并用于高速生產高密度結構泡沫，噴涂硬泡，硬泡板材。 APPLICATION: Used for CASE, rigidfoam and shoe sole etc
13品名：五甲基二乙烯三胺(PMDETA) NAME: HJCP-PMDETA(PMDETA) CAS NO：3030-47-5 分子式FORMULA:C9H23N3 用途：用于各種聚氨酯硬泡和聚醚型聚氨酯軟塊泡和模塑泡沫 APPLICATION: Used for all kindsof PU rigid foam and ployether PU flexible foam.
14品名：二甲基環己胺 NAME: HJCP-DMCHA(DMCHA) CAS NO：98-94-2 分子式FORMULA:C8H17N 用途：用于硬質聚氨酯泡沫塑料. APPLICATION: Used for rigid foam.
15品名：純雙(二甲氨基乙基)醚 NAME: HJCP-BDMAEE(BDMAEE) CAS NO: 3033-62-3 分子式FORMULA：C8H20N2O
16品名：(A-1) 70%雙(二甲氨基乙基)醚(A-1) NAME: HJCP-A(A-1) BDMAEE:70% DPG:30% 用途: 用于聚氨酯泡沫塑料，特別適用于生產高回彈，半硬泡和低密度泡沫塑料。 APPLICATION：Used for polyurethane foam, especially for HR,semi-rigid foam and low-density foam.
17品名：異辛酸鉀 NAME: HJCP-MCK(Potassium2-ethylhexanoate) CAS NO：3164-85-0 分子式FORMULA:C8H15O2K HJCP-MCK15 (Equivalent to K-15) HJCP-MCT45 (Equivalent to T-45) 用途：異辛酸鉀是聚氨酯硬泡的三聚催化劑，活性高，用于噴涂硬泡，PIR(耐高溫)硬泡和PU硬泡. APPLICATION: Used for rigid foamand PIR.
18品名：雙嗎啉基二乙基醚(DMDEE) NAME: HJCP-DMDEE(DMDEE) CAS NO.：6425-39-4 分子式FORMULA: C12H24N2O2 用途：用于單組分硬質聚氨酯泡沫體系，也可用于聚醚型和聚酯型聚氨酯軟泡，半硬泡，CASE材料等. APPLICATION:Used forone-component polyurethane rigid foam, it can also be used for flexible foam ,semi-rigid foam and CASE etc.
19品名：二甲基乙醇胺 NAME：MEA 用于聚氨酯軟質塊狀泡沫, 模塑泡沫和硬質泡沫, 陰燃彈性泡沫等;用作水溶性涂料助溶劑, 聚氨酯漆固化劑;
20品名：甲基膦酸二甲酯 NAME: DMMP CAS NO:756-79-6 分子式FORMULA: C3H9O3P 用途: 是一種高效的有機磷阻燃劑，用于軟質和硬質聚氨酯泡沫塑料，阻燃效果很好。 APPLICATION: Phosphoric flameretardant, used for flexible and rigid PU foam.
21品名：乙基膦酸二乙酯 NAME: DEEP CAS NO:78-38-6 分子式FORMULA: C6H15O3P 用途：是一種新型的高效有機磷阻燃劑，可廣泛添加在各種硬質聚氨酯泡沫塑料中。 APPLICATION: Phosphoric flameretardant, used for rigid PU foam.
